Key Features
【All-in-One Solar Hybrid】 This all-in-one hybrid solar system represents a cutting-edge solution that integrates both solar and AC power supply. It combines 80A MPPT solar charging, AC/generator battery charging, and inverter into a convenient solution into one convenient package, elevating your off-grid system to a hybrid level and providing the ability to transform your system into an uninterruptible power supply (UPS).
【Compatible with All Battery Types】 Supports various battery types (AGM/Sealed, Gel, Lead-Acid, Lithium) with a customizable user mode.
【Reliable Pure Sine Wave】 Based on a fully digital intelligent design, the DC-AC inverter module uses advanced SPWM technology and generates a pure sine wave to convert DC to AC.
【4 charging modes available】 There are four charging modes to choose from: PV Prioriity Modes, Utility Priority Modes, Hybrid Charging Modes, Only Solar Charging Modes.
【Uninterruptible power supply】 With a built-in UPS (Uninterruptible Power Supply) function, the unit immediately switches to battery power during a blackout and prevents computers and other devices from shutting down.
The all-in-one solar inverter integrates a 24V 3000W inverter, an 80A charger, and a charge controller. It utilizes highly efficient MPPT technology of up to 99.9% to capture maximum solar energy at all times. With 4 charging modes and 3 output modes, it can meet various requirements. Comprehensive electronic protection features ensure the safety and stability of the entire system.
Sollten Sie Fragen haben, übermitteln Sie uns bitte eine Ticket!
AC CHARGING MODE SPECIFICATIONS | |
---|---|
Rated Input Voltage: 220/230Vac | Input Voltage Range:(170Vac~280Vac) ±2%,(90Vac-280Vac) ±2% |
Frenquency:50Hz/ 60Hz (Auto Detect) | Frenquency Range: 47±0.3Hz ~ 55±0.3Hz (50Hz), 57±0.3Hz ~ 65±0.3Hz (60Hz) |
Overload/Short-Circuit Protection: Leitungsschutzschalter | Efficiency: >95% |
Conversion Time: 10ms (typical) | Reverse Flow Protection: Available |
Maximum Bypass Overload Current: 30A |
|
INVERTER MODE SPECIFICATIONS | |
Output Waveform: Pure Sine Wave | Rated Output Power (W):3000 |
Power Factor:1 | Rated Output Voltage (Vac): 230Vac |
Output Voltage Error: ±5% | Output Frequency (Hz): 50Hz ± 0,3Hz, 60Hz ± 0,3Hz |
Maximum Efficiency: >92% | Overload Protection: (102% < Load < 125%) ±10%: Report error and shut down output after 5 minutes; (125% < Load < 150%) ± 10%: Report error and shut down output after 10 seconds; Load >150% ±10%: Report error and shut down output after 5 seconds; |
Peak Power: 6000VA |
Durable Motors: 2HP |
Battery Rated Input Voltage: 24V (Minimum Start Voltage 22V) | Battery Voltage Range: Undervoltage Alarm/Cut-off Voltage/Overvoltage Alarm/Overvoltage Recovery... adjustable on the LCD screen |
Power Saver Mode Consumption:Load ≤25W | |
AC CHARGING MODE SPECIFICATIONS | |
Battery Type: Lead Acid and Lithium Battery | Maximum Charging Current (adjustable): 0-80A |
Charging Current Error: ± 5Adc | Charging Voltage Range: 20 –33Vdc |
Short-Circuit Protection: Circuit Breakers and Blown Fuses | Circuit Breaker Specifications: 30A |
Overload Protection: Alarm and Charging Shutdown After 1 Minute | |
SOLAR CHARGING MODE SPECIFICATIONS | |
Maximum PV Open Circuit Voltage: 500Vdc | PV Operating Voltage Range: 120-500Vdc |
MPPT Voltage Range: 120-450Vdc | Battery Voltage Range: 20 –33Vdc |
Maximum Input Power: 4000W | PV Charging Current Range (adjustable): 0-80A |
Short-Circuit Protection During Charging: Blown Fuse | Wiring Protection: Reverse Polarity Protection |
Maximum Charging Current (adjustable): 0-80A |
|
CERTIFIED SPECIFICATIONS | |
Certification: CE(IEC 62109-1) | EMC Certification Level: EN61000, C2 |
Operating Temperature: -10°C to 55°C | Storage Temperature Range: -25°C to 60°C |
Humidity Range: 5% to 95% (Protected by Conformal Coating) | Noise: ≤60dB |
Heat Dissipation: Fan Cooling, Variable Fan Speed | Communication port: USB/CAN/RS485(WiFi/GPRS)/dry node control |
Dimensions (L*W*T): 378mm*280mm*103mm |
Weight (kg): 7.4 |