The REGO DC-DC Battery Charger's exclusive bidirectional charging technology not only provides the most effective way to charge your house batteries from the starter battery on the go but also recharges and maintains your starter battery when the house batteries are full. The battery charger is compatible with the most popular 12V alternators and batteries. 4-Stage charging provides reliable and effective charging of your batteries. The REGO DC-DC battery charger is ideal for RVs, commercial vehicles, boats, yachts, and vans that need stable energy on the go!
If you have any questions regarding this product, please submit a case !
Renogy’s bidirectional charging system uses state-of-art technology to charge your house and starter batteries when driving. REGO smart chargers switch to charging your starter battery when house batteries are full to ensure you have all the power you need at your destination.
The RENOGY REGO DC-DC battery charger uses 75A Anderson terminals and specially designed Anderson-Ring Lug connectors for a simple and easy way to connect to batteries, cutting installation time by 60%!
The REGO DC-DC Battery Charger features a built-in Bluetooth module that allows you to monitor the charging status using the Renogy DC Home App on your smartphone. Setting the battery type selector to to USER MODE, you will also be able to customize the Boost Voltage, Float Voltage, and Boost Duration time on the App.
Note if the maximum charge volatge of your system is less than 60A, you need to customize the charging current of the battery charger to the appropriate parameters, which can also be set in USER MODE.
The REGO DC-DC battery charger can perform in extreme heat and cold. It features a matched temperature sensor that can protect your battery from high or low temperature by giving -3mV/°C/2V compensation. This delivers stable and constant charging, and prolongs the battery lifespan.
Note that the temperature sensor cannot use with Lithium batteries.
This battery charger is compatible with Gel, AGM, SLD, Flooded, and Lithium batteries. The easy-to-use selector allows simple setting of the battery type, no more complicated data setting steps.
The REGO battery charger provides built-in Overvoltage Protection, Overtemperature Protection, and Reverse Polarity Protection on both inputs and outputs to ensure maximum operation safety. Backed by a 5-year warranty, with certifications including FCC- ID, CE-RED, MIC, etc.
This diagram shows the whole connection of the DC-DC On-Board Battery Charger.
REGO 12V 60A DC-DC Battery Charger
Accessories with the DCDC
4 X Mounting Screws
1 X IGN Signal Wire (Red)
1 X Renogy Temperature Sensor (Black)
Options:5FT 6AWG ANDERSON ADAPTER CABLE FOR OUTPUT SIDE（Anderson PP75 - 3/8 in Lugs）
Options: 10FT 6AWG ANDERSON ADAPTER CABLE FOR INPUT SIDE（Anderson PP75 - 3/8 in Lugs）
|REGO 12V 60A DC-DC Battery Charger|
|System Voltage: 12V||Battery Types:SLD/AGM;FLD;GEL;USER;LI|
|Input Voltage: 10 -16V DC||Output Voltage: 10 -16V DC|
|Alternator Input Voltage:
Traditional Alternator: 13.5-16VDC
Smart Alternator (Euro 6): 12.5-16VDC
|Maximum Output Current Rating: 60A||Output Power: 800W|
|Input Fuse Rating: 90A||Output Fuse Rating:80A|
|Idle Power Consumption:≤50 mA||Charge Efficiency: Up to 94%|
|Operating Temperature Range:'-20 ℃ - 60℃ / -4 ℉ - 140℉||Storage Temperature Range: '-35 ℃ - 65℃/ -31℉ - 149℉|
|Humidity:0%-95%, No Condensation||
Temperature Compensation: '-3mV / ℃ / 2V (Non-Lithium)
'0mV / ℃ / 2V; no compensation (Lithium)
Surge Protection/Short Circuit Protection/Reverse Polarity Protection/Overvoltage Protection/Over Discharge
Protection/Overcurrent Protection/Over Temperature Protection/Overcurrent Protection/Open Circuit Protection
|Grounding Type:Common Negative Lug|
|Communication:Modebus ; RV-C||Dimensions (L x W x D):13.78 x 8.39 x 4.02 inch / 350 x 213 x 102 mm|
|Weight:7 lbs/ 3.12kg||Terminal Range: 8AWG - 6AWG|
|Terminal Size:Anderson PP75||Certifications: CB, FCC, CE, UKCA, MIC|
|Accessories||5-year material warranty|
The REGO DC-DC Battery Charger with the built-in Bluetooth module allows you to monitor the charging status through Renogy DC Home App by cellphone. You will be able to get the data on the voltage of the starter battery and house battery, the charging current of the battery charger, the reverse charging current, etc.